Command Reference NTP Commands
Enables NTP authentication.
Configures an NTP authentication key.
Configures an NTP server.
Use this command to enable the NTP client to periodically update the device clock with the time
synchronized from the external source clock. Use the no form of this command to remove this
function.
By default, update the calendar periodically is not configured.
Global configuration mode.
By default, the NTP update-calendar is not configured. After configuration, the NTP client updates the
calendar at the same time when the time synchronization of external time source is successful. It is
recommended to enable this function for keeping the accurate calendar.
The following example configures the NTP update calendar periodically.
Ruijie(config)# ntp update-calendar
Use this command to display the NTP server configuration.
To Next Page
Loading...
