Ruijie RG-S29 Series

Command Reference Supervisor Module Redundancy Commands
13.2 redundancy
Use this command to enter redundancy configuration mode.
redundancy
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
The following example enters redundancy configuration mode.
Ruijie# config terminal
Ruijie(config)# redundancy
Ruijie(config-red)# exit
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
13.3 redundancy forceswitch
Use this command to perform active/standby supervisor module switchover.
redundancy forceswitch
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode