Ruijie RG-S29 Series

Command Reference PoE Management Commands
N/A
N/A
Defaults
This function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
The following example enables Trap notification in PoE MIB(RFC3621).
Ruijie(config)# poe notification-control enable
Ruijie(config)# end
Ruijie#write
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
14.7 poe pd-description
Use this command to set the PD descriptor for the port. Use the no or default form of this command
to restore the default setting.
poe pd-description pd-name
no poe pd-description
default poe pd-description
Parameter
Description
Parameter
Description
pd-name
PD descriptor name, a string no more than 32 characters.
Defaults
N/A
Command
Mode
Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the PD descriptor for port GigabitEthernet 0/1.
Ruijie# configure
Ruijie(config)# interface GigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)# poe pd-description ap220