Command Reference PoE Management Commands
This function is disabled by default.
Global configuration mode
This function takes effect when the device is started after the configuration is saved.
The following example enables uninterruptible PoE for warm start and saves configuration.
Ruijie(config)# poe uninterruptible-power
Ruijie(config)# end
Ruijie#write
Use this command to set the power alarm threshold for the system. Use the no or default form of this
command to restore the default setting,
default poe warning-power
Power alarm threshold (percentage), in the range from 0 to 99.
Global configuration mode
The following example sets the power alarm threshold for the system to 80%.
Ruijie(config)# poe waring-power 80
Ruijie(config)# end
Ruijie#write
To Next Page
Loading...
