Ruijie RG-S29 Series

Command Reference PoE Management Commands
Commands
N/A
N/A
Platform
Description
N/A
14.13 show poe interfaces
Use this command to display PoE status or configuration of all ports.
show poe interfaces status
show poe interfaces configuration
Parameter
Description
Parameter
Description
status
Displays PoE status of all ports.
configuration
Displays PoE configuration of all ports.
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
This command is used to display PoE status or configuration of all ports.
Configuration
Examples
The following example displays PoE status of all ports.
Ruijie#show poe interfaces status
Interface Power Power Curr Avg Peak Curr Trouble PD Port
Control Status Power Power Power Current Cause Class Voltage
------------------------------------------------------------------------
Gi0/1 enable on 14.8W 14.8W 14.8W 278mA 0 4 53.5V
Gi0/2 enable on 28.4W 28.4W 28.4W 531mA 0 4 53.5V
Gi0/3 enable on 14.9W 14.9W 14.9W 279mA 0 4 53.5V
Gi0/4 enable off 0.0W 0.0W 0.0W 0mA 6 N/A 0.0V
Gi0/5 enable on 14.8W 14.8W 14.8W 278mA 0 4 53.5V
Gi0/6 enable on 15.0W 15.0W 15.0W 281mA 0 4 53.5V
Gi0/7 enable on 6.1W 6.1W 6.1W 115mA 0 4 53.5V
Gi0/8 enable on 14.8W 14.8W 14.8W 277mA 0 4 53.5V
Gi0/9 enable on 14.7W 14.7W 14.7W 276mA 0 4 53.5V
Gi0/10 enable on 14.8W 14.8W 14.8W 278mA 0 4 53.5V
Gi0/11 enable on 14.7W 14.7W 14.7W 275mA 0 4 53.5V
Gi0/12 enable off 0.0W 0.0W 0.0W 0mA 6 N/A 0.0V
Gi0/13 enable on 14.8W 14.8W 14.8W 278mA 0 4 53.5V
Gi0/14 enable on 0.3W 0.3W 0.3W 7mA 0 4 53.5V
Gi0/15 enable off 0.0W 0.0W 0.0W 0mA 6 N/A 0.0V