Ruijie RG-S29 Series

Command Reference PoE Management Commands
Platform
Description
N/A
14.14 show poe powersupply
Use this command to display the PoE power supply status.
show poe powersupply
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example displays the PoE power supply status.
Ruijie#show poe powersupply
Device member : 1
Power management : auto
PSE total power : 1000W
PSE total power consumption : 300W
PSE total remain power : 700W
PSE total powered port : 0
PSE disconnect mode : dc
PSE reserve power : 0%
PSE warning power : 99%
PSE class lldp : disable
PSE uninterruptible-power : disable
PSE member : 1
PSE Power status : normal PSE Power
Enabled : enable
PSE max power : 300W
PSE priority : low
PSE alloc power : 300W
PSE available power : 300W
PSE total power consumption : 0 W
PSE total remain power : 300W
PSE peak power : 0 W
PSE average power : 0 W
PSE powered port : 0