Ruijie RG-S29 Series User Manual

Command Reference Interface Commands
admin duplex mode is AUTO, oper duplex is Unknown
admin speed is AUTO, oper speed is Unknown
flow receive control admin status is OFF,flow send control admin status is
OFF,flow receive control oper status is Unknown,flow send control oper status is
Unknown
broadcast Storm Control is OFF,multicast Storm Control is OFF,unicast Storm Control
is OFF
Port-type: hybrid
Tagged vlan id:2
Untagged vlan id:none
5 minutes input rate 0 bits/sec, 0 packets/sec
5 minutes output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer, 0 dropped
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 abort
0 packets output, 0 bytes, 0 underruns , 0 dropped
0 output errors, 0 collisions, 0 interface resets
The following example displays the layer-2 information of the Gi0/1.
Ruijie# show interfacesgigabitEthernet 0/1 switchport
Interface Switchport ModeAccess Native Protected VLAN lists
--------- ---------- --------- ------ ------ ---------
GigabitEthernet 0/1 enabled Access 11 Disabled ALL
Related
Commands
Command
Description
duplex
Duplex
flowcontrol
Flow control status.
interface gigabitEthernet
Selects the interface and enter the interface
configuration mode.
interface aggregateport
Creates or accesses the aggregate port, and enters
the interface configuration mode.
interface vlan
Creates or accesses the switch virtual interface
(SVI), and enters the interface configuration mode.
shutdown
Disables the interface.
speed
Configures the speed on the port.
switchport priority
Configures the default 802.1q interface priority.
switchport protected
Configures the interface as a protected port.
Platform
Description
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English