Ruijie RG-S29 Series

Command Reference MAC Address Commands
interface GigabitEthernet 0/1.
Ruijie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#interface GigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#max-dynamic-mac-count 160
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.9 show mac-address-learning
Use this command to display the MAC address learning.
show mac-address-learning
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
All modes.
Usage Guide
N/A
Configuration
Examples
The following example displays the MAC address learning.
Ruijie# show mac-address-learning
GigabitEthernet 0/0 learning ability: disable
GigabitEthernet 0/1 learning ability: enable
GigabitEthernet 0/2 learning ability: enable
GigabitEthernet 0/3 learning ability: enable
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.10 show mac-address-table
Use this command to display all types of MAC addresses (including dynamic address, static address