Ruijie RG-S29 Series User Manual

Command Reference VLAN Commands
Ruijie(config)# interface gigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#switchport mode hybrid
Ruijie(config-if-GigabitEthernet 0/1)#switchport hybrid allowed vlan tagged
40
Ruijie(config-if-GigabitEthernet 0/1)#switchport hybrid allowed vlan tagged
50
The following example removes the hybrid port from VLAN 20.
Ruijie(config)# interface gigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#switchport mode hybrid
Ruijie(config-if-GigabitEthernet 0/1)#switchport hybrid allowed
vlan remove 20
The following example adds the hybrid port to VLAN 20 and deletes all the other VLANs. The VLAN
packets going out on the port are tagged with VLAN ID.
Ruijie(config)# interface gigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#switchport mode hybrid
Ruijie(config-if-GigabitEthernet 0/1)#switchport hybrid allowed
vlan only tagged 20
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
4.6 switchport hybrid native
Use this command to configure the native VLAN for the hybrid port. Use the no or default form of this
command to restore the default setting.
switchport hybrid native vlan vlan-id
no switchport hybrid native vlan
default switchport hybrid native vlan
Parameter
Description
Parameter
Description
vlan-id
Configures the native VLAN for the hybrid port.
Defaults
The default is VLAN 1.
Command
mode
Interface configuration mode

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English