Ruijie RG-S29 Series User Manual

Command Reference MAC VLAN Commands
5 MAC VLAN Commands
5.1 mac-vlan enable
Use this command to enable the MAC VLAN function on the port.
Use the no form or default form of this command to restore the default setting.
mac-vlan enable
no mac-vlan enable
default mac-vlan enable
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
By default, MAC VLAN is disabled.
Command
mode
Interface configuration mode
Usage Guide
The MAC VLAN entries configured globally will not take effect on the port unless the MAC VLAN
function is enabled on this port.
The MAC VLAN function can be enabled on the hybrid port only.
Configuration
Examples
The following example enables MAC VLAN.
Ruijie(config-if-interface-id)# mac-vlan enable
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
5.2 mac-vlan mac-address
Use this command to configure the static MAC VLAN entries.
Use the no form or default form of this command to restore the default setting.
mac-vlan mac-address mac-address [ mask mac-mask ] vlan vlan-id [ priority pri_val ]
no mac-vlan mac-address mac-address [mask mac-mask] vlan vlan-id [ priority pri_val ]
default mac-vlan mac-address mac-address [mask mac-mask] vlan vlan-id [ priority pri_val ]

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English