Ruijie RG-S29 Series

Command Reference MAC VLAN Commands
vlan vlan-id
Displays the MAC VLAN entries of the specified VLAN.
Defaults
N/A
Command
mode
All configuration modes
Usage Guide
If the mac-address parameter is specified without the mask parameter, the MAC-VLAN entry of the
single MAC address is displayed.
If parameters both of mac-address and mask are specified, the MAC-VLAN entries in the specified
MAC address range are displayed.
Configuration
Examples
The following example displays all MAC VLAN entries.
Ruijie# show mac-vlan all
The following MAC VLAN addresses exist:
S: Static D: Dynamic
MAC ADDR MASK VLAN ID PRIO STATE
-------------------------------------------------------
0011.1100.0000 ffff.ff00.0000 100 1 S
0022.2222.0000 ffff.ffff.0000 200 2 S
0000.0000.0003 ffff.ffff.ffff 300 3 D
0000.0000.0004 ffff.ffff.ffff 400 4 D
0000.0000.0005 ffff.ffff.ffff 500 5 S&D
0000.0000.0006 ffff.ffff.ffff 600 6 S
0000.0000.0007 ffff.ffff.ffff 700 7 S&D
Total MAC VLAN address count: 7
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
5.4 show mac-vlan interface
Use this command to display the interfaces which are enabled with MAC VLAN.
show mac-vlan interface
Parameter
Description
Parameter
Description
N/A
N/A