Command Reference MSTP Commands
show spanning-tree interface
Displays the STP configuration of the interface.
9.5 clear spanning-tree mst topochange record
Use this command to clear STP topology change record.
clear spanning-tree mst instance-id topochange record
Instance ID. For STP and RSTP protocols, only instance 0 is valid.
The following example clears STP topology change record.
Ruijie# show spanning-tree mst 0 topochange record
Topology change information on mst 0:
Time Interface Old status New status Type
------------------- -------------------- ------------ ------------
----------------
2013.5.1 4:18:46 GI0/6 Learning Forwarding Normal
Ruijie# clear spanning-tree mst 0 topochange record
Ruijie# show spanning-tree mst 0 topochange record
%There's no topology change information has been record on mst 0.
9.6 instance instance-id vlan vlan-range
Use this command to set instance and VLAN mapping relations. Use the no form of the command to
To Next Page
Loading...
Need help?
General