Ruijie RG-S29 Series

Command Reference MSTP Commands
N/A
N/A
Platform
Description
N/A
9.12 spshow l2protocol-tunnel stp
Use this command to display BPDU TUNNEL configuration.
show l2protocol-tunnel stp
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode / Global configuration mode / Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example displays BPDU TUNNEL configuration.
Ruijie# show l2protocol-tunnel stp
L2protocol-tunnel: stp Enable
L2protocol-tunnel destination mac address:011a.a900.0005
GigabitEthernet 0/1 l2protocol-tunnel stp enable
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
9.13 show spanning-tree
Use this command to display the global spanning-tree configuration.
show spanning-tree [summary | forward-time | hello-time | max-age | inconsistentports|
tx-hold-count | pathcost method | max_hops | counters]
Parameter
Description
Parameter
Description