Ruijie RG-S29 Series

Command Reference MSTP Commands
9.14 show spanning-tree interface
Use this command to display the STP configuration of the interface, including the optional spanning
tree.
show spanning-tree interface interface-id [ { bpdufilter | portfast | bpduguard | link-type } ]
Parameter
Description
Parameter
Description
interface-id
Interface ID
bpdufilter
Displays the status of BPDU filter.
portfast
Displays the status of portfast.
bpduguard
Displays the status of BPDU guard.
link-type
Displays the link type of an interface.
Defaults
N/A
Command
Mode
Privileged EXEC mode, global configuration mode and interface configuration mode.
Usage Guide
N/A
Configuration
Examples
The following example displays the STP configuration on interface Gi 0/1.
Ruijie# show spanning-tree int gi 0/1
PortAdminPortFast : Disabled
PortOperPortFast : Disabled
PortAdminAutoEdge : Enabled
PortOperAutoEdge : Disabled
PortAdminLinkType : auto
PortOperLinkType : point-to-point
PortBPDUGuard : Disabled
PortBPDUFilter : Disabled
PortGuardmode : None
###### MST 0 vlans mapped :ALL
PortState : forwarding
PortPriority : 128
PortDesignatedRoot : 32768.001a.a979.00ea
PortDesignatedCost : 0
PortDesignatedBridge :32768.001a.a979.00ea
PortDesignatedPortPriority : 128
PortDesignatedPort : 1
PortForwardTransitions : 1
PortAdminPathCost : 200000