Command Reference LLDP Commands
System capabilities supported
Capabilities supported by the system
System capabilities enabled
Capabilities currently enabled by the system
LLDP-MED capabilities supported by the system
MED device class, which is divided into 2 categories: network
connectivity device and terminal device.
Network connectivity device
Class I: normal terminal device
Class II: media terminal device; besides Class I capabilities, it
also supports media streams.
Class III: communication terminal device; it supports all the
capabilities of Class I and Class II and IP communication.
Asset tracking identifier
Management address subtype
Interface numbering subtype
Type of the interface identified by the management address
ID of the interface identified by the management address
ID of the object identified by the management address
Port and protocol VLAN ID
Port and Protocol VLAN ID
Indicates whether port and protocol VLAN is supported
Indicates whether port and protocol VLAN is enabled
Auto-negotiation supported
Indicates whether auto-negotiation is supported
Indicates whether auto-negotiation is enabled
PMD auto-negotiation
advertised
Auto-negotiation advertising capability of the port
Speed and duplex state of the port
Indicates whether POE is supported
Link aggregation supported
Indicates whether link aggregation is supported
Indicates whether link aggregation is enabled
ID of the link aggregation port
Maximum frame size supported by the port
To Next Page
Loading...
Need help?
General