Ruijie RG-S29 Series

Command Reference QinQ Commands
Platform
Description
N/A
12.12 show dot1q-tunnel
Use this command to display whether dot1q-tunnel of interface is enabled or not.
show dot1q-tunnel [ interface intf-id ]
Parameter
Description
Parameter
Description
intf-id
The specified interface.
Defaults
N/A
Command
Mode
Any mode
Usage Guide
N/A
Configuration
Examples
The following example displays whether dot1q-tunnel of interface is enabled or not.
Ruijie# show dot1q-tunnel
Ports Dot1q-tunnel
----- ---------
Gi0/1 Enable
Related
Commands
Command
Description
N/A
N/A
Platform
Description
12.13 show frame-tag tpid
Use this command to display the configuration of interface tpid.
show frame-tag tpid [interface <intf-id>]
Parameter
Description
Parameter
Description
intf-id
Specifies the interface.
Defaults
N/A