Command Reference QinQ Commands
The following example displays the MAC address mapping configuration.
ruijie# show interfaces mac-address-mapping
Ports Status Index Destination-VID Source-VID-list
------------ ---------- ---------- --------------- ------------------
Gi0/1 active 2 3 2
12.17 show interfaces remark
Use this command to display the priority mapping configuration.
show interfaces [ intf-id ] remark
The following example displays the priority mapping configuration.
Ruijie# show interfaces remark
Ports Type From value To value
------------ ----------- ----------- --------
Gi0/1 Cos-To-Cos 3 5
To Next Page
Loading...
