Ruijie RG-S29 Series User Manual

Command Reference IP Address/Service Commands
Description
value
Sets the TTL value of the unicast packet, in the range from
0 to 255.
Defaults
The default is 64.
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the TTL value of the unicast packet to 100.
Ruijie(config)# ip ttl 100
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
1.10 ip unreachables
Use this command to allow the RGOS software to generate ICMP destination unreachable
messages. Use the no form of this command to disable this function.
ip unreachables
no ip unreachables
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is enabled by default.
Command
Mode
Interface configuration mode.
Usage Guide
RGOS software will send a ICMP destination unreachable message if it receives unicast message
with self-destination-address and can not process the upper protocol of this message.
RGOS software will send ICMP host unreachable message to source data if it can not forward a
message due to no routing.
This command influences all ICMP destination unreachable messages.
Configuration
The following example disables sending ICMP destination unreachable message on FastEthernet

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English