Command Reference IP Address/Service Commands
Show whether the IP address is obtained through
negotiation.
Forward direct-broadcast is:
Show whether the directed broadcast is forwarded.
Show whether an ICMP mask response message is sent.
Show whether an ICMP redirection message is sent.
Send ICMP unreachabled is:
Show whether an ICMP unreachable message is sent.
Show whether the DHCP relay is enabled.
Show whether the IP fash switching function is enabled.
Route horizontal-split is:
Show whether horizontal split is enabled, which will affect
the route update behavior of the distance vector protocol.
Show the helper IP address.
Show whether the agent ARP is enabled.
ARP packet input number:
Request packet:
Reply packet:
Unknown packet:
Show the total number of ARP packets received on the
interface, including:
ARP request packet
ARP reply packet
Unknown packet
TTL invalid packet number:
Show the TTL invalid packet number
ICMP packet input number:
Echo request:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Show the total number of ICMP packets received on the
interface, including:
Echo request packet
Echo reply packet
Unreachable packet
Source quench packet
Routing redirection packet
1.12 show ip packet queue
Use this command to display the statistics of IP packet queues.