Ruijie RG-S29 Series

Command Reference IP Address/Service Commands
1.13 show ip packet statistics
Use this command to display the statistics of IP packets.
show ip packet statistics [ total | interface-name ]
Parameter
Description
Parameter
Description
interface-name
Interface name
total
Displays the total statistics of all interfaces.
Defaults
N/A.
Command Mode
Privileged EXEC mode.
Usage Guide
N/A.
Configuration
Examples
The following example displays the output of this command.
R1#show ip packet statistics
Total
Received 113962 packets, 11948991 bytes
Unicast:90962,Multicast:5232,Broadcast:17768
Discards:0
HdrErrors:0(BadChecksum:0,TTLExceeded:0,Others:0)
NoRoutes:0
Others:0
Sent 34917 packets, 1863146 bytes
Unicast:30678,Multicast:4239,Broadcast:0
GigabitEthernet 0/1
Received 6715 packets, 416587 bytes
Unicast:2482,Multicast:4233,Broadcast:0
Discards:0
HdrErrors:0(BadChecksum:0,TTLExceeded:0,Others:0)
NoRoutes:0
Others:0
Sent 6720 packets, 417096 bytes
Unicast:2481,Multicast:4239,Broadcast:0
Loopback 0
Received 0 packets, 0 bytes
Unicast:0,Multicast:0,Broadcast:0
Discards:0
HdrErrors:0(BadChecksum:0,TTLExceeded:0,Others:0)
NoRoutes:0
Others:0
Sent 0 packets, 0 bytes
Unicast:0,Multicast:0,Broadcast:0