Command Reference IP Address/Service Commands
9 mpls.elf DGRAM UDP 0.0.0.0:3503 0.0.0.0:0
*
10 rds_other_th DGRAM UDP 0.0.0.0:3799 0.0.0.0:0
*
11 rg-snmpd DGRAM UDP 0.0.0.0:14800 0.0.0.0:0
*
12 rg-sshd STREAM TCP 0.0.0.0:22 0.0.0.0:0
LISTEN
13 rg-telnetd STREAM TCP 0.0.0.0:23 0.0.0.0:0
LISTEN
14 wbard STREAM TCP 0.0.0.0:4389 0.0.0.0:0
LISTEN
15 wbard STREAM TCP 0.0.0.0:7165 0.0.0.0:0
LISTEN
Total: 15
Field Description
Socket type, including the following types:
RAW: raw sockets
DGRAM: datagram type
STREAM: stream type.
Local IP address and port.
Peer IP address and port.
State. This field is for only TCP sockets.
The total number of sockets.
Use this command to display IPv4 UDP sockets.
show ip udp [ local-port num ]
Use this command to display IPv4 UDP socket statistics.