Ruijie RG-S29 Series User Manual

Command Reference IPv6 Commands
Flags: !M!O, Adv MTU: 1500
ND advertised reachable time is 0 milliseconds
ND advertised retransmit time is 0 milliseconds
ND advertised CurHopLimit is 64
Prefixes: (total: 1)
fec0:1:1:1::/64(Def,Auto,vltime: 2592000, pltime: 604800, flags: LA)
Description of the fields in ra-info:
Field
Meaning
RA timer is stopped (on)
Indicate whether the RA timer is started.
waits
Indicate that the RS is received but the number of the responses is
not available.
initcount
Indicate the number of the RAs when the RA timer is restarted.
RA(out/in/ inconsistent)
out: Indicate the number of the RAs that are sent.
In: Indicate the number of the RAs that are received.
inconsistent: Indicate the number of the received RAs in which the
parameters are different from those contained in the RAs advertised
by the device.
RS(input)
Indicate the number of the RSs that are received.
Link-layer address
Link-layer address of the interface.
Physical MTU
Link MTU of the interface.
!M | M
!M indicates the managed-config-flag bit in the RA is not set.
M: Conversely
!O | O
!O indicates the other-config-flag bit in the RA is not set.
O: Conversely
Description of the fields of the prefix list in ra-info:
Field
Meaning
total
The number of the prefixes of the interface.
fec0:1:1:1::/64
A specific prefix.
Def
Indicate that the interfaces use the default prefix.
Auto | CFG
Auto: Indicate the prefix is automatically generated after the
interface is configured with the corresponding IPv6 address. CFG:
Indicate that the prefix is manually configured.
!Adv
Indicate that the prefix will not be advertised.
vltime
Valid lifetime of the prefix, measured in seconds.
pltime
Preferred lifetime of the prefix, measured in seconds.

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English