Ruijie RG-S29 Series

Command Reference IPv6 Commands
Platform
Description
N/A
3.32 show ipv6 neighbors statistics
Use the following command to show the statistics of IPv6 neighbors.
show ipv6 neighbors statistics [all]
Parameter
Description
Parameter
Description
all
Displays the statistics of all IPv6 neighbors.
Defaults
N/A
Command Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example displays the statistics of the global neighbors.
Ruijie#show ipv6 neighbor statistics
Memory: 0 bytes
Entries: 0
Static: 0,Dynamic: 0,Local: 0
Incomplete:0, Reachable:0, Stale:0, Delay:0, Probe:0
Ruijie#
The following example displays the statistics of all IPv6 neighbors.
Ruijie#show ipv6 neighbor statistics all
IPv6 neighbor table count: 1
Static neighbor count: 0(0 active, 0 inactive)
Total
Memory: 0 bytes
Entries: 0
Static: 0,Dynamic: 0,Local: 0
Incomplete:0, Reachable:0, Stale:0, Delay:0, Probe:0;
Global
Memory: 0 bytes
Entries: 0
Static: 0,Dynamic: 0,Local: 0
Incomplete:0, Reachable:0, Stale:0, Delay:0, Probe:0;