Ruijie RG-S29 Series

Command Reference FTP Server Commands
7 FTP Server Commands
7.1 ftp-server enable
Use this command to enable the FTP server. Use the default form of this command to restore the
default setting.
ftp-server enable
default ftp-server enable
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
This command is used to enable the FTP server to connect the FTP client to upload/download the
files.
Configuration
Examples
The following example enables the FTP Server and confines the FTP client access to the syslog
subdirectory:
Ruijie(config)# ftp-server topdir /syslog
Ruijie(config)# ftp-server enable
The following example disables the FTP Server:
Ruijie(config)# no ftp-server enable
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A