Ruijie RG-S29 Series

Command Reference FTP Server Commands
Parameter
Description
Parameter
Description
time
Sets the number of login attempts, in the range from 1 to 10.
Defaults
The default is 3.
Command Mode
Global configuration mode
Usage Guide
The number of login attempts refers to the maximum count you are allowed to perform
authentication. If the number of your login attempts exceeds 3, you will be forced offline.
Configuration
Examples
The following example sets the number of login attempts to 5.
Ruijie(config)# ftp-server login times 5
The following example restores the default setting.
Ruijie(config)# no ftp-server login times
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
7.4 ftp-server timeout
Use this command to set the FTP session idle timeout. Use the no form of this command to restore
the default setting.
ftp-server timeout time
no ftp-server timeout
Parameter
Description
Parameter
Description
time
Sets the session idle timeout, in the range from 1 to 3600 in the unit of
minutes.
Defaults
The default is 10 minutes.
Command
Mode
Global configuration mode.
Usage Guide
Use this command to set the FTP session idle timeout. If the session is idle, the FTP server deems