Ruijie RG-S29 Series

Command Reference FTP Server Commands
Configuration
Examples
The following example sets the username to user:
Ruijie(config)# ftp-server username user password pass
The following example restores the default setting:
Ruijie(config)# no ftp-server username user
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
7.7 show ftp-server
Use this command to show the status information of the FTP server.
show ftp-server
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
The FTP server status information includes:
 Enabled/Disabled server
 The FTP server top directory
 The FTP server user information, including username, password and connection number. If
connection is set up, the IP address, port, transmission type, active/passive mode is shown
Configuration
Examples
The following example displays the related status information of the FTP server:
Ruijie#show ftp-server
ftp-server information
===================================