Command Reference TFTP Server Commands
9 TFTP Server Commands
9.1 tftp-server enable
Use this command to enable the TFTP server.
Use the no form of this command to disable the TFTP server.
The TFTP server is disabled by default.
Global configuration mode
Only with the TFTP server enabled and the top directory configured meanwhile, TFTP clients are able to
upload or download files.
The following example enables the TFTP server and sets the top directory of the TFTP server to /syslog.
Ruijie(config)# tftp-server topdir /syslog
Ruijie(config)# tftp-server enable
The following example disables the TFTP server.
Ruijie(config)# no tftp-server enable
Use this command to configure the top directory for TFTP clients.
Use the no or default form of this command to restore the default setting.
tftp-server topdir directory
default tftp-server topdir
To Next Page
Loading...
Need help?
General