Ruijie RG-S29 Series

Command Reference RIP Commands
Ruijie (config-router)# access-list 10 permit 172.16.0.0 0.0.255.255
Related
Commands
Command
Description
access-list
Defines the ACL rule.
prefix-list
Defines the prefix list.
Platform
Description
N/A
1.6 distribute-list out
Use this command to control route update advertisement for filtering routes. Use the no form of this
command to restore the default setting.
distribute-list { [ access-list-number | name ] | prefix prefix-list-name } out [ interface | [ connected
| ospf process-id | rip | static ] ]
no distribute-list { [ access-list-number | name ] | prefix prefix-list-name } out [ interface |
[connected | ospf process-id | rip | static ] ]
Parameter
Description
Parameter
Description
access-list-number | name
Specifies the ACL.
prefix prefix-list-name
Uses the prefix list to filter routes.
interface
(Optional) Applies route update advertisement control to a specified
interface in the distribution list.
connected
(Optional) Applies route update advertisement control to only
connected routes in this distribution list.
ospf process-id
(Optional) Applies route update advertisement control to only routes
introduced from OSPF in this distribution list. process-id specifies an
OSPF instance.
rip
(Optional) Applies route update advertisement control to only RIP
routes in this distribution list.
static
(Optional) Applies route update advertisement control to only static
routes in this distribution list.
Defaults
No route update advertisement is configured by default.
Command
Mode
Routing process configuration mode
Usage Guide
If this command relates to none of optional parameters, route update advertisement control applies to
all interfaces. If this command relates to interface options, route update advertisement control applies
to only the specified interface. If this command relates to other route process parameters, route