Ruijie RG-S29 Series

Command Reference Line Commands
Configuration
Examples
The following example describes the line location as Swtich’s Line VTY 0.
Ruijie(config)# line vty 0
Ruijie(config-line)# location Swtich’s Line Vty 0
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
3.22 monitor
Use this command to enable log display on the terminal. Use the no form of this command to restore
the default setting,
monitor
no monitor
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Line configuration mode
Usage Guide
N/A
Configuration
Examples
The following example enables log display on the terminal in VTY line 0 5.
Ruijie(config)# line vty 0 5
Ruijie(config-line)# monitor
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A