Ruijie RG-S29 Series User Manual

Command Reference OSPFv2 Commands
TOS: 0
Metric: 20
NSSA: Forward Address: 100.0.2.1
External Route Tag: 0
The following table describes the fields in the output of the show ip ospf database nssa-external
command.
Field
Description
OSPF Router
with ID
Displays the router ID.
NSSA-external
Link States
Displays the type 7 autonomous external LSA information.
LS age
Displays the keepalive period of the LSA.
Options
Option
LS Type
Displays the type of the LSA.
Link State ID
Displays the link ID of the LSA.
Advertising
Router
Displays the device advertising the LSA.
LS Seq Number
Displays the sequential number of the LSA.
Checksum
Displays the checksum of the LSAs.
Length
Displays the length (in bytes) of the LSA.
Network Mask
Displays the network mask of the route corresponding to the LSA.
Metric Type
Displays the metric type.
TOS
TOS value, which can be 0 only now.
Metric
Displays the metric of the route corresponding to the LSA.
NSSA:Forward
Address
IP address through which traffic is forwarded to the destination
network. If this address is 0.0.0.0, the data traffic will be forwarded to
the device that generates the link state.
External Route
Tag
External route tag. Each external route has a 32-byte route tag. The
OSPF does not use the route tag by itself, but it will be used in
redistributing OSPF routes by other routing process.

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English