Command Reference NSM Commands
S29 series switch does not support ISIS or BGP. The configuration example is only for
reference.
The memory size occupied by the current routing
table.
The entries in the current routing table (based on
the entry prefix instead of the next hop entry.)
Describes the protocol type of the entry. The field
can be;
Connected: Connected route entry.
Static: Static route entry.
RIP: RIP route entry.
OSPF: OSPF route entry.
ISIS: ISIS route entry.
BGP: BGP route entry.
TOTAL: Total number of all protocol entries.
The number of the routing tables.
The name of the current routing table. The field
can be:
Global : Global (The default VRF)
VRF1: VRF name.
TOTAL: All VRF routing table summaries.
To Next Page
Loading...
Need help?
General