Ruijie RG-S29 Series

Command Reference Protocol-independent Configuration Commands
configuration
Command
mode
Global configuration mode
Examples
The example below adds a sequence number for the prefix list:
Ruijie# configure terminal
Ruijie(config)# ipv6 prefix-list pre description Deny routes from Net-A
Related
commands
Command
Description
ipv6 prefix-list
Configure the IPv6 prefix list.
6.11 key
Use this command to define an encryption key and enter the encryption key chain configuration mode.
Use the no form of this command to delete it.
key key-id
no key key-id
Parameter
description
Parameter
Description
key-id
Key ID, ranging from 0 to 2147483647.
Default
No encryption key is configured.
Command
mode
Encryption key chain configuration mode.
Usage
guideline
Use this command to define an encryption key.
Examples
The following example configures encryption key chain ripkeys and key 1.
Ruijie(config)# key chain ripkeys
Ruijie(config-keychain)# key 1
Related
command
Command
Description
-
-
Platform
description
-