Ruijie RG-S29 Series

Command Reference IPv4 Multicast Routing Commands
1 IPv4 Multicast Routing Commands
1.1 msf ipmc-overflow override
Use this command to enable the overflow overriding mechanism. Use the no or default
form of this command to disable the overflow overriding mechanism.
msf ipmc-overflow override
no msf ipmc-overflow override
default msf ipmc-overflow override
Parameter
Description
Parameter
Description
-
-
Default
Disabled.
Command Mode
Global configuration mode.
Usage Guide
N/A
Examples
The following example enables the overflow overriding mechanism.
Ruijie (config)# msf ipmc-overflow override
Ruijie (config)#
1.2 msf nsf
Use this command to configure the parameter for the continuous multicast forwarding. Use
the no or default form of this command to restore the default setting.
msf nsf {{convergence-time time} | {leak interval} }
no msf nsf {convergence-time | leak}
default msf nsf { convergence-time | leak }
Parameter
Description
Parameter
Description
convergence-time ttl-value
Maximum time for the multicast protocol convergence, in
the valid range of the 0-3600s.
leak interval
Packet multicast leak time, in the valid range of 0-3600s
Default
convergence-time time :140s;
leak interval: 150s