Command Reference IGMP Snooping Commands
Number of multicast groups. The value ranges from 0 to
65,536.
Global configuration mode
The maximum number of multicast groups includes the multicast groups in all ports of all
VLANs (including dynamic and static multicast groups). When the number of multicast groups
reaches the limit, learning new group records and configuring new static multicast group
ports are not allowed.
The following example sets the maximum number of multicast groups to 2000.
Ruijie(config)# ip igmp snooping l2-entry-limit 2000
Displays the maximum number of multicast groups.
2.11 ip igmp snooping max-groups
Use this command to configure the maximum number of groups that can be added dynamically to this
interface.
Use the no or default form of this command to restore the default setting.
ip igmp snooping max-groups number
no ip igmp snooping max-groups
default ip igmp snooping max-groups
The maximum group number from 0 to 1,024
No maximum group number is configured by default.
Interface configuration mode
If a maximum number of multicast groups are configured, the device will no longer receive and process
IGMP Report messages when the number of multicast groups on this interface is beyond the range.
The following example configures the maximum number of multicast groups to 100 on the megabit
interface 0/1:
To Next Page
Loading...
Need help?
General