Ruijie RG-S29 Series User Manual

Command Reference IGMP Snooping Commands
vid
VLAN ID in the range from 1 to 4,094
Defaults
If IGMP Snooping (IVGL mode) is enabled globally, all VLANs are enabled with IGMP Snooping (IVGL
mode).
If IGMP Snooping (IVGL mode) is not enabled globally, all VLANs are not enabeld with IGMP Snooping
(IVGL mode).
Command
Mode
Global configuration mode
Usage Guide
Use this command to enable or disable the IGMP snooping on the specified vlan.
The PIM Snooping in the specified VLAN works only when IGMP Snooping is configured. To
disable PIM Snooping, you must disable IGMP Snooping in the VLAN first, or disabling will fail
and be prompted.
Configuration
Examples
The following example enters IVGL mode and disables the IGMP Snooping in the VLAN 2.
Ruijie(config)# ip igmp snooping ivgl
Ruijie(config)# no ip igmp snooping vlan 2
Platform
Description
N/A
2.28 ip igmp snooping vlan mrouter interface
Use this command to configure a static routing interface.
Use the no form of this command to delete a static routing interface.
Use the default form of this command to restore the default setting.
ip igmp snooping vlan vid mrouter interface interface-type interface-number
no ip igmp snooping vlan vid mrouter interface interface-type interface-number
default ip igmp snooping vlan vid mrouter interface interface-type interface-number
Parameter
Description
Parameter
Description
vid
VLAN ID in the range from 1 to 4,094
interface-type
interface-number
Interface ID
Defaults
No static routing interface is configured by default.
Command
Mode
Global configuration mode

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English