Configuration Guide AAA Commands
no aaa domain { default | domain-name }
Uses this parameter to configure the default domain.
The name of the specified domain
No domain is configured by default.
Global configuration mode
Use this command to configure the domain-name–based AAA service. The default is to configure the
default domain. That is the method list used by the network device if the users are without domain
information. The domain-name is the specified domain name, if the users are with this domain name,
the method lists associated with this domain are used. At present, the system can configure up to 32
domains.
The following example configures the domain name.
Ruijie(config)# aaa domain ruijie.com
Ruijie(config-aaa-domain)#
Enables the AAA security service.
Enables the domain-name-based AAA service.
Displays the domain configuration.
Use this command to enable domain-name-based AAA service.
Use the no form of this command to restore the default setting.
This function is disabled by default.
Global configuration mode