Configuration Guide AAA Commands
The configured domain is valid.
Domain configuration mode
Use this command to set whether the specified configured domain is valid.
The following example sets the configured domain to be invalid.
Ruijie(config)# aaa domain ruijie.com
Ruijie(config-aaa-domain)# state block
Enables the AAA security service.
Enables the domain-name-based AAA service.
Displays the domain configuration.
Use this command to configure the user name whether to be with the domain information when the
NAS interacts with the servers.
Use the no form of this command to restore the default setting.
username-format { without-domain | with-domain }
Sets the user name without the domain information.
Sets the user name with the domain information.
The default is without-domain.
Domain configuration mode
Use this command to configure the user name whether to be with the domain information when the
NAS interacts with the servers.
The following example sets the user name without the domain information.
Ruijie(config)# aaa domain ruijie.com
Ruijie(config-aaa-domain)# username-domain without-domain