Terex MHL360 E - Operating Hours

4 DISPLAY AND CONTROL ELEMENTS
4.40 MHL360 E
4.5.13.2 Operating hours
This display screen shows the operating
hours of individual components.
Call-up
► Main control display > Main menu > Diag-
nostics menu > Operating hours
F3
F4
F6
F7
F8
F9
F5
ENGINE From ECU
0 h
0 h
0 h
0 h
0 h
0 h
0 h
0 h
0 h
8
9
6
7
1
2
3
4
5
ENGINE From D-Plus
WORK HYDRAULICS
DRIVE ENGINE
IGNITION ON
Ignition Off With Engine Running
Therof Not At Low Idle
LS-Pressure over 380 bar
Load over 110%
F1
F2
BSB50625
Fig. 72 Operating hours
1 DIESEL ENGINE - from the engine control device
2 ENGINE RUN TIME - of D-Plus
3 WORKING HYDRAULICS
4 TRAVEL MOTOR
5 IGNITION ON
6 With the engine running, switch off the ignition (ser-
vice engineers only)
7 Not in low idle (service engineers only)
8 LS pressure over 360 bar (service engineers only)
9 Load value over 100% (service engineers only)