Terex MHL360 E - Range Limiting (Optional)

OPERATION 5
MHL360 E 5.57
5.19.4 Range limiting (optional)
j WARNING
Danger of injury from collisions
The range limit is not a safety de-
vice, rather, it is an auxiliary func-
tion.
Collisions may arise due to:
- Work attachments
- Loading
- Cut-off path
• Maintain a safe distance in ac-
cordance with the risk of collision.
• No rapid movements of the dip-
perstick close to the cut-off
points.
In an emergency: Administer first
aid, seek treatment from a doctor
Automatic cut-off
If the outer part of the loading equipment
reaches the cut-off limit (179/1), the range
limitation stops the functions of dipperstick
and boom that will exceed the cut-off limit with
further actuation. The coordinates of the cut-
off limit can be changed.
h Chapter 4.5.14.2 Set limits (optional)
Range limitation is always activated automati-
cally when the ignition is switched on. On the
main control display, corresponding indicators
(180/30) and text messages (180/34) appear.
Symbol
Limit
Actions
B SB507 65
Loading de-
vice outside
None
B SB507 63
1
Dipperstick
in the limit
range
Corresponding func-
tion is switched off
Indicator not flashing,
color (1): orange
Text message
"LOADING DEVICE HAS
REACHED RANGE
LIMIT"
1
3
2
4
4
BSB50782
Fig. 179 Range limit
1 Prescribed range limit
2 Dipperstick extension cut-off
3 Boom lowering cut-off
4 Override option
F
09 :43 11 .03. 2 011
MH LX X X / XXX X
18 00 U PM
0 5 1 0 15 20 2 5
95°C 7 5°C
0 ½ 1
9 %
120 0
BSB50664
34
30
Fig. 180 Range limit