Terex MHL360 E - Wiper Water; Wiper Blade

7 CARE AND MAINTENANCE
7.72 MHL360 E
7.7.20 Wiper water
In wiper mode, the windows are sprayed by
outlet nozzles (330/1) and (330/4) with wiper
water.
The filler neck of the fluid container (331/1) for
the windshield washer is located on the rear
of the cab. The container holds approx.
3.5 liters. We recommend that you always add
window cleaner containing antifreeze to the
water.
7.7.21 Wiper blade
In the end position, the windshield wiper is
kept in its position (330/3) such that it does
not flap into the cab when the windshield is
opened.
The wiper blade is fitted to the wiper arm
(330/3). A worn wiper blade should be re-
placed from inside the cab. To do this, slide
the windshield up and lock it.
MHL-XXXX-313
1
4
2
3
Fig. 330 Upper windshield wiper
MHL-XXXX-312
1
Fig. 331 Filler neck for fluid container
7.7.20
Wiper
water