Terex MHL360 E - Malfunctions in the Central Lubrication System; Work Attachments

8 TROUBLESHOOTING
8.10 MHL360 E
Possible Cause
Remedy
8.9.16 Malfunctions in the magnet system
1
In the event of malfunctions in the magnet
system, e.g. no magnetizing or no demagnet-
izing function:
Check the V-belt on the generator drive. Have
the fuses checked by a specialist and correct
defects.
8.9.17 Malfunctions in the central lubrication system
1
Tank empty
Top up the tank.
2
Ventilation filter contaminated
Clean ventilation filter. Replace filter material if
necessary.
3
Lubricating pump or distributor of lubricant
defective
Have the central lubrication system checked by
a specialist.
8.9.18 Work attachments
1
Grab not opening or closing, or opening and
closing too slowly.
Check quick coupling, replace if necessary.
2
Grab not rotating.
Check the quick coupling and the electrical
connection between the microswitch and the
solenoid valve. Check the fuses.
344