5 OPERATION
5.14 MHL360 E
5.6 After starting
5.6.1 Checking the diesel particle filter
status
Burns from hot exhaust system,
hot exhaust gas
• Maintain a safe distance.
• No suction in the vicinity of the
exhaust system.
In an emergency: Administer first
aid, seek treatment from a doctor.
Regeneration of diesel particle filter
The diesel particle filter reduces the particles
present in the exhaust gas of diesel engines.
If it is heavily loaded with particles, an auto-
matic regeneration occurs for approx.
25 minutes. The loading machine can be con-
tinue to be operated during this operation. The
display (118/62) indicates the status:
Display off: No regeneration required.
Display flashes slowly: Regeneration re-
quired. Is now started automatically.
Display on: Regeneration running.
During the regeneration, the particles lodged
in the filter burn off. Exhaust gas speed and
exhaust temperature increase up to 650°C.
Therefore, regeneration should not take place
in a hall with combustible and/or lightweight
materials for example, but in the open air in-
stead. The display (118/62) therefore has a
button function in order to prevent a regenera-
tion. The tendency is indicated by (117/37).
Color (1): red. Regeneration
starts automatically from
100% and a coolant tempera-
ture above 75°C.
►
After the diesel engine is started, check
indicators (117/37) and display (118/62).
►
If regeneration is due to start shortly, check
the coolant temperature. If the environment
is not suitable for regeneration, find anoth-
er location.
F
09 :43 11 .03. 2 011
MH LX X X / XXX X
18 00 U PM
0 5 1 0 15 20 2 5
95°C 7 5°C
0 ½ 1
9 %
120 0
BSB50880
37
Fig. 117 Loading indicator
Fig. 118 Diesel particle filter regeneration
To Next Page
Loading...
