Terex MHL360 E - The Cab as Workplace; Adjusting the Operators Seat

5 OPERATION
5.6 MHL360 E
5.4 The cab as workplace
5.4.1 Adjusting the operator's seat
j WARNING
Serious injury due to uninten-
tional machine movements
• Adjust operator's seat before
starting the diesel engine.
In an emergency: Administer first
aid, seek treatment from a doctor
j WARNING
Back injuries due to incorrectly
adjusted seat
• Before commissioning the ma-
chine or changing drivers, adjust
the individual driver's weight set-
ting.
In an emergency: Seek treatment
from a doctor
►
Adjust operator's seat to individual weight
and size of the operating personnel.
►
Adjust armrests such that the four-way
control levers can be operated effortlessly
with the forearm resting on them.
BSB50031BSB50825
4
13
12
11
10
6
8
7
9
4
5
3
2
1
Fig. 100 Operator's seat
1 Rocker switch for heated seat (Optional)
The heated seat switches off automatically when the
temperature is reached.
2 Rocker switch for upper and lower lumbar support
tilt forward: lumbar part round;
tilt backward: lumbar part straight
3 Handle for backrest adjustment (tilt)
4 Two point safety belt
5 Hand wheel for armrest height
6 Stop lever for horizontal spring system (reduces
horizontal vibrations in direction of travel)
Lever locked in place backward: seat locked in place
Lever set forward: seat not locked in place
7 Handle for longitudinal adjustment of entire seat
8 Handle for longitudinal adjustment of seat (upper
part)
9 Handle for combined height and body weight ad-
justment
Press handle briefly: weight is adjusted automatically
Raise or press handle: adjust height
10 Handle for seat cushion adjustment (tilt)
11 Handle for seat depth adjustment (leg rest)
12 Handle for shock absorber
Turn lever towards cab door: hard
Turn lever upwards: medium
Turn lever away from seat: soft
13 Armrest tilt
14 Headrest