Terex MHL360 E - Table of Carrying Capacity (16.5 M Loading Equipment)

TECHNICAL DATA 3
MHL360 E 3.3
3.2.2 Table of carrying capacity (16.5 m loading equipment)
The carrying capacity values are stated in metric tons (to). The pump pressure is 360 bar. The
values represent 75% of the static tipping load or 87% of the hydraulic lifting force (marked ), in
accordance with ISO 10567. On solid and level ground, the values apply to a swing range of 360°.
The (...) values apply in the longitudinal direction of the undercarriage. The values for "not sup-
ported" apply when the load is hoisted above the steering axle or the locked oscillating axle.
ATTENTION
The weight of the attached hoisting equipment (grab, load hook, etc.) must be deducted from the carrying
capacity values. The safe working load of the hoisting equipment must be observed.
In accordance with EU Standard EN 474-5, hose-rupture safety devices on the lift and dipperstick
cylinders, an overload warning device, and a carrying capacity table in the cab are required for
hoisting. Only hoist when the machine's outriggers are up. In machines with an overload warning
device und overload cut-off device, the warning or shutdown function relates to the values without
brackets.
Loading equipment: Boom 8.9 m, dipperstick 7.0 m
Height
Undercarriage
Reach in m
m
Outrigger
4.5
6
7.5
9
10.5
12
13.5
15
16.5
15
not supported
(8.4°)
(5.8°)
4-pt supported 8.4° (8.4°) 5.8° (5.8°)
13.5
not supported
(8.7)
(6.7)
(5.2)
4-pt supported
9.3° (9.3°)
8.3° (8.3°)
5.8° (5.8°)
12
not supported
(8.8)
(6.8)
(5.3)
(4.2)
4-pt supported
9.2° (9.2°)
8.2° (8.2°)
7.5° (7.5°)
5.0° (5.0°)
10.5 not supported (8.8) (6.8) (5.3) (4.3)
4-pt supported
9.2° (9.2°)
8.2° (8.2°)
7.4° (7.4°)
6.5 (6.7°)
9
not supported
(8.6)
(6.7)
(5.3)
(4.3)
(3.4)
4-pt supported
9.4° (9.4°)
8.3° (8.3°)
7.5° (7.5°)
6.4 (6.7°)
5.3 (5.6°)
7.5
not supported
(11.2°)
(8.4)
(6.5)
(5.2)
(4.2)
(3.4)
4-pt supported 11.2° (11.2°) 9.7° (9.7°) 8.5° (8.5°) 7.6° (7.6°) 6.4 (6.8°) 5.3 (6.0°)
6
not supported
(14.8°)
(10.6)
(8.0)
(6.2)
(5.0)
(4.1)
(3.4)
4-pt supported
14.8° (14.8°)
12.2° (12.2°)
10.2° (10.2°)
8.8° (8.8°)
7.6 (7.7°)
6.3 (6.8°)
5.2 (6.0°)
4.5
not supported
(17.0)
(13.8)
(9.9)
(7.5)
(5.9)
(4.8)
(3.9)
(3.3)
(2.7)
4-pt supported
24.0° (24.0°)
17.0° (17.0°)
13.1° (13.1°)
10.7° (10.7°)
9.0° (9.0°)
7.4 (7.8°)
6.1 (6.8°)
5.2 (6.0°)
4.4 (4.8°)
3 not supported (12.3) (9.0) (7.0) (5.6) (4.6) (3.8) (3.2) (2.7)
4-pt supported
18.4° (18.4°)
13.8° (13.8°)
10.9° (10.9°)
8.7 (9.2°)
7.1 (7.9°)
6.0 (6.8°)
5.1 (5.8°)
4.4 (4.8°)
1.5
not supported
(11.1)
(8.3)
(6.5)
(5.3)
(4.4)
(3.7)
(3.1)
(2.7)
4-pt supported
12.2° (12.2°)
13.6 (14.0°)
10.4 (11.2°)
8.4 (9.2°)
6.9 (7.8°)
5.8 (6.7°)
5.0 (5.6°)
4.3 (4.4°)
0
not supported
(9.1°)
(7.8)
(6.2)
(5.0)
(4.2)
(3.5)
(3.0)
(2.7)
4-pt supported 9.1° (9.1°) 13.0 (13.6°) 10.0 (10.9°) 8.1 (9.0°) 6.7 (7.5°) 5.7 (6.4°) 4.9 (5.2°) 3.8° (3.8°)
-1.5
not supported
(8.9°)
(7.5)
(6.0)
(4.9)
(4.1)
(3.5)
(3.0)
4-pt supported 8.9° (8.9°) 12.6° (12.6°) 9.8 (10.2°) 7.9 (8.5°) 6.6 (7.0°) 5.6 (5.8°) 4.6° (4.6°)
-3
not supported
(9.6°)
(7.4)
(5.8)
(4.8)
(4.0)
(3.4)
(3.0)
4-pt supported
9.6° (9.6°)
10.9° (10.9°)
9.1° (9.1°)
7.5° (7.5°)
6.2° (6.2°)
5.0° (5.0°)
3.6° (3.6°)
-4.5 not supported (7.5) (5.8) (4.8) (4.0)
4-pt supported
8.7° (8.7°)
7.4° (7.4°)
6.2° (6.2°)
5.0° (5.0°)
Fig. 9 Carrying capacity table (16.5 m loading equipment)