7 CARE AND MAINTENANCE
7.12 MHL360 E
7.3.3 Alternative recommendations for
other temperature ranges
The ambient temperature is decisive when
selecting the right hydraulic oil. The tempera-
ture ranges listed in the graphic are approxi-
mate guides. Values above or below these
limits are acceptable for short periods.
7.3.4 Biodegradable hydraulic fluid
PANOLIN HLP SYNTH 46
We recommend biodegradable hydraulic flu-
ids based on synthetic ester as an alternative
to mineral oils. The same viscosity limit values
apply as for mineral oils.
When changing from mineral to
biodegradable hydraulic oils, the
tank and hydraulic system must be
completely drained, cleaned and
flushed. Warranty conditions as
well as the changeover guideline
from KLEENOIL PANOLIN AG
should be complied with.
Ester-based biodegradable hydrau-
lic oils must not be mixed with oils
from different manufacturers or
with mineral oil. Doing so may
cause aggressive reactions which
in turn could damage the hydraulic
system.
Before changing oils, please ask your local
TEREX | Fuchs dealer for advice.
Vegetable-based oils are not permitted be-
cause of their unsuitable temperature re-
sistance.
RENOLIN XTREME TEMP 46
RENOLIN B15
PANOLIN HLP SYNTH 46
BSB50509
Fig. 252 Ambient temperature of hydraulic oil
To Next Page
Loading...
