Terex MHL360 E - Monitoring, Maintenance and Inspection Plans

7 CARE AND MAINTENANCE
7.28 MHL360 E
7.6 Monitoring, maintenance and inspection plans
7.6.1 Initial inspection (delivery inspection)
Work to be performed by trained dealer or service personnel:
Item
Test method
Page No
1
Check whether machine-specific operating instructions are available in the machine
—
2
Checking the engine oil level
7.7.2.1
3
Checking the coolant level
7.4.3
4
Check hydraulic oil level
7.4.4
5
Check the fuel level.
7.4.2
6
Check the oil levels in the axles, wheel hubs, swing gear and drive transmission
7.4.7
7
Check the condition of the tires and the wheel nut fastenings.
7.4.6
8
Check the filling level and charge of the batteries.
7.7.22
9
Top up windshield washer system
7.7.20
10
Lubricate the machine (all lubricating points).
7.5
11
Perform a test run, a functional test of the hydraulic system and a test job.
—
12
Perform a visual inspection for leaks on all pipes, hoses, cylinders, etc.
—
13
Check function of electrical indicating and warning elements, as well as the lighting
7.4.8
14
Observe specifications on the warranty transfer card
—