Terex MHL360 E - Page 249

CARE AND MAINTENANCE 7
MHL360 E 7.29
7.6.2 Daily and weekly tasks
7.6.2.1 Daily tasks
Inspection and maintenance jobs to be performed by operating staff:
Item
Test method
Page No
1
Check hydraulic oil level
7.4.4
2
Checking the engine oil level
7.7.2.1
3
Checking the coolant level
7.4.3
4
Check the fuel prefilter in the fuel line for water and accumulation of sludge and
clean if necessary.
7.4.2.2
5
Check the fuel level (fuel gauge in the multifunction display).
7.4.2
6
Check the cleaning fluid level for the windscreen wipers.
7.7.20
7
Check for leaks in the exhaust system, lines, hoses, control unit, hose rupture safe-
ty valves (optional), hydraulic pumps, cylinders, etc.
h
When tightening hose and line connections, the screw couplings must be locked
to prevent rotation.
—
8 Visual inspection of all steel parts and components for material cracks, deformation,
wear, external damage, completeness, etc.
—
9 Check electrical indicating and warning elements, as well as the lighting system 7.4.8
10
Check smooth running of operator controls and
—
11
Check the cab's lifting equipment for proper function.
—
12
Check the function of the angular resolvers (optional).
7.7.23
13
Check the function of the overload warning device (optional).
7.7.24
14
Lubricate the machine according to the overview of lubricating points.
7.5
15
Check the central lubrication system and the lubricating points it supplies in terms of
leaks, seating of the connections and the lubricant supply.
7.5