Terex MHL360 E - Increasing the Operating Pressure

OPERATION 5
MHL360 E 5.61
5.19.6 Increasing the operating pressure
The increase operating pressure function
raises the hydraulic pressure to 355 bar. It is
to be used only briefly in cases of heavy work,
for example. The pressure increase is effec-
tive only for raising the boom and extending
the dipperstick.
►
Press button toggle (188/49) on the right
four-way control lever and keep it held
down.
I
0
BSB50655
49
Fig. 188 Increasing the operating pressure