7 CARE AND MAINTENANCE
7.80 MHL360 E
7.10 Disposal
Serious or fatal injuries due to
moving parts and residual ener-
gies
• Only specialists authorized and
trained by the manufacturer may
undertake removal work.
• Observe the national safety
standards for dismantling ma-
chinery.
• Wear safety clothing.
• Relieve pressure in the hydraulic
system.
• Individual hydraulic components
are under high residual pressure.
Only open disconnection points or
components following consulta-
tion with the manufacturer.
• Pressure accumulators are filled
with nitrogen and are pressurized.
Do not open!
• The air conditioning system is
filled with refrigerant. Observe the
manufacturer's safety instruc-
tions.
• Secure moving parts against slip-
ping and toppling down before
and during dismantling.
• Store removed components in a
safe place.
In an emergency: Administer first
aid, seek treatment from a doctor
Danger of injury due to battery
acid
• Remove battery and protect
against damage.
In an emergency: Rinse eyes or
skin immediately with fresh water.
Seek treatment from a doctor im-
mediately.
Collect fuels, lubricants and cool-
ants in suitable reservoirs. Do not
allow them to seep into the ground
or water! Give to an authorized
waste disposal company to sort and
dispose of in an environmentally-
friendly manner.
To Next Page
Loading...
