Terex MHL360 E - Adapting the Loading Machine to the Work Task; Warming up the Loading Machine

5 OPERATION
5.18 MHL360 E
5.6.4 Warming up the loading machine
If the operating temperature has not yet been
reached, the machine control unit does not yet
enable full power. The loading machine is to
be operated at medium diesel engine speed
and with reduced loading. The main control
display indicates the temperature of the cool-
ant for the diesel engine and the hydraulic oil.
xx
C
1
B SB50846
Coolant Temperature
Operating temperature has been
reached if background color (1) is black
XX
C
1
B SB50847
Hydraulic fluid temperature
Operating temperature has been
reached if background color (1) is black
h Chapter 5.21.2 Coolant Temperature
Chapter 5.21.8 Hydraulic fluid temperature
5.6.5 Adapting the loading machine to
the work task
►
Position the loading machine at the materi-
al to be loaded.
►
Specify diesel engine speed and FINE
MODE for work task.
h Chapter 5.7.1 Specifying the diesel en-
gine speed
►
Switch on supporting functions.
F
09 :43 11 .03. 2 011
MH LX X X / XXX X
18 00 U PM
0 5 1 0 15 20 2 5
95°C 7 5°C
0 ½ 1
9 %
120 0
BSB50845
35 36
Fig. 123 Temperature display